-
EDFA Erbium-Doped Fiber Amplification CardEDFA: Erbium-Doped Fiber Amplification Card Product Description EDFA is an erbium-doped fiber amplification card.Its main function is to compensate the power of the signal light in the transmission link, and it can amplify the optical signals of up to 48 channels (channel interval of...
-
400G Coherent OEO Wavelength Converter QSFP‑DD to CFP2 400G 3R Adaptive Modulation 1RU400G Coherent OEO: 1*CFP2+1*QSFP-DD Product Description The 400G coherent OTU service card supports one 400GE service accesses, Its main function is to perform one 400GE service signals that are accessed, and can be transformed into three WDM standard wavelength optical signal, so that the...
-
100G Coherent OEO Wavelength Converter 1600km Reach QPSK C‑band 96λ Electrical Relay100G Coherent OEO: 1*CFP+1*QSFP28 Product Description The 100G coherent OEO service card supports one 100GE service access, adopts advanced technologies such as QPSK modulation and coherent reception, and overcomes the transmission physical effects of high-speed transmission systems on OSNR requirements, CD tolerance, PMD tolerance,...
-
40G/100G OEO Wavelength Converter 3xQSFP28 to 3xQSFP28 3R SM/MM Convertible40G&100G OEO: 6*QSFP28 Product Description The 40G&100G incoherent OEO service card supports three 40GE or 100GE bilingual service access. Its main function is to perform 3R regeneration of three 40GE or 100GE service signals that are accessed, and can be transformed into three WDM...
-
25G OTU Wavelength Converter 4xSFP28 to 4xSFP28 3R Any Protocol 16-32G25G OTU: 8*SFP28 Product Description The 25G incoherent OEO service card supports four types of service access with 16 to 32G rates. Its main function is to finish the 3R regeneration of any 4-channel signals under any protocol within the rate of 25 Gbit/s...
-
10G OEO Wavelength Converter 4xSFP+ to 4xSFP+ 3R Any Protocol 42M-11.3G10G OCP: 10G protection OEO Card Product Description The 10G protection OEO Card is an optional part of WDM system, which is mainly used in line protection and ring network protection networking. At the transmitting end, one optical signal is divided into two identical...
-
10G OEO Protection Card 1+1 Line & Ring Protection Low Latency 0.5U10G OCP: 10G protection OEO Card Product Description The 10G protection OEO Card is an optional part of WDM system, which is mainly used in line protection and ring network protection networking. At the transmitting end, one optical signal is divided into two identical...
-
400G Coherent Muxponder 4×100GE to 400G Long Haul Coherent 16QAM400G Coherent TMUX:1*CFP+4*QSFP28 Product Description The 400G coherent TMUX service card supports four 100GE service accesses, adopts advanced technologies such as 16QAM modulation and coherent reception, and overcomes the transmission physical effects of high-speed transmission systems on OSNR requirements, CD tolerance, PMD tolerance, and...
-
200G Coherent Muxponder | 2×100GE to 200G, Long Haul, Coherent QPSK200G Coherent TMUX: 1*CFP2+2*QSFP28 Product Description The 200G coherent TMUX service card supports two 100GE service access, adopts advanced technologies such as QPSK modulation and coherent reception, and overcomes the transmission physical effects of high-speed transmission systems on OSNR requirements, CD tolerance, PMD tolerance,...
-
40G/100G Muxponder Card 4:1 Aggregation Multi‑Service Low Latency40G&100G TMUX: 4*SFP28↔QSFP28 Product Description The 40G&100G incoherent muxponder service card supports 4x10G↔40G or 4x25G↔100G electrical layer multiplexing/demultiplexing, and transforms the multiplexed/demultiplexed optical signals into WDM standard wavelength optical signals. It can facilitate the wavelength division multiplexing of the optical signals of different wavelengths...
Currency
Close
Sidebar
- Choosing a selection results in a full page refresh.