Sales@fibernice.com
Huawei ETP4830-A1 30A Power Supply
Product Testing
We test products one by one. We test product functionality by simulating real-world usage scenarios to ensure smooth operation.
One-stop Service
Our products include optical fiber equipment, optical cable, accessories, tools, etc., whether you are a wholesaler, distributor, engineer, ISP, we can meet your needs.
14 months Warranty
Our warranty is above industry standards, up to 14 months. This is based on our confidence in the quality of our products and we want to give our customers more protection
Feature
1. ZTE PSU-AC 30A Power Supply Equipped with 2*R4815G/R4815N(Power module), 1*SMU01C.
2. Comes with 2 PCS 4Pin Cable + 1 PCS AC Power Cable.
3. Supports 2 power supply devices.
4. Supports 1 set of power battery.
5. 1605W total available power supply.
6. Supports a wide voltage range of 85 V AC to 300 V AC.
7. Provides comprehensive battery management.
8. The SMU01C connects to the power and environment over YDN protocol and access network host over master/slave protocols.
9. Displays information on a liquid crystal display (LCD) and provides buttons for operations.
10. Supports electronic labels.
11. Rectifiers and the site monitoring unit (SMU) are hot-swappable.
12. Allows high-efficiency and standard-efficiency rectifiers with the same capacity to coexist.
13. The rectifier power factor is 0.99..
| Operating temperature | -40ºC to +70ºC NOTE：The system can run for 8 hours at 70ºC |
| Transportation temperature |
-40ºC to +70ºC |
| Storage temperature | -40ºC to +70ºC |
| Operating humidity | 5%–95% RH (non-condensing) |
| Storage humidity | 5%–95% RH (non-condensing) |
| Altitude | 0-4000 m When the altitude ranges from 2000 m to 4000 m, the operating temperature decreases by 1ºC for each additional 200m. |
| Input mode | 230 V AC single-phase three-wire (L, N), compatible with 230 V AC dual-live-wire (L, L) |
| Input frequency | 45–66 Hz (rated frequency: 50/60 Hz) |
| Power factor | ≥ 0.99 (100% load) |
| Output voltage range | -42 V DC- -58 V DC |
| Default output voltage | -53.5 V DC |
| Maximum output power | 2000 W |
| Regulated voltage precision |
≤ ±0.6% |
| Peak-to-peak noise voltage |
≤ 200 mV (0–20 MHz) |
| AC input overvoltage protection threshold |
Overvoltage protection is performed when the single-phase AC input voltage exceeds the AC input overvoltage protection threshold (300 V AC by default). |
| AC input overvoltage recovery threshold |
When the voltage is restored to 290 V AC, the output resumes. |
| AC input undervoltage protection threshold |
Undervoltage protection is performed when the single-phase AC input voltage is below the AC input undervoltage protection threshold (80 V AC by default). |
| AC input undervoltage recovery threshold |
When the voltage is restored to 85 V AC, the output resumes. |
| DC output overvoltage protection threshold |
-58.5 V DC to -60.5 V DC |
| Safety and regulatory design |
Complies with IEC/EN60950-1 and passes TUV and CE. |
| Mean time between failures (MTBF) |
250,000 hours |
| Dimensions (H x W x D) | 43.6 mm x 442 mm x 255 mm |
| Weight | ≤10 kg (with rectifiers) |
| Protection level | IP20 |
| Installation mode | Adapts to 19-inch cabinets and ETSI cabinets by using different types of mounting ears |
| Maintenance mode | Maintained from the front |
- Choosing a selection results in a full page refresh.