DCI3100 Integrated DCI WDM System – 1U, 1.6T per Unit
DCI3100 integrated DCI WDM system in a 1U chassis: up to 1.6T (16x100G) per unit, 16 QSFP28 100GE ports, line-side 1+1 protection and AC 1+1 hot-swap power.
Description
Overview
The DCI3100 is an integrated wavelength division system developed for data centre interconnect (DCI) scenarios. It combines large capacity, a small size, low energy consumption and high cost performance, and is housed in a standard 1U chassis.
A single unit supports up to 1.6T (16 × 100G) of transmission capacity and can be expanded smoothly to 3.2T through device stacking. High-density optoelectronic integration and a switch-like design avoid complex fibre jumper connections, keeping installation extremely simple.
DCI3100 8x100GE Key Features
- Compact and high-capacity — 1RU box-type design with a stackable form factor; one unit carries up to 1.6T (16 × 100G) and stacking two units delivers 3.2T per fibre
- Simple and flexible deployment — no complex optical layer configuration and no change to the original network topology
- Mixed transmission of multiple services, including 100GE, with flexible customisation of service interfaces and quantities
- Reliable and easy to maintain — line side 1+1 protection with automatic route selection and an in-band monitoring channel for SNMP management
- One-box site delivery with plug-and-play operation
- Data centre optimised — front-to-rear airflow design and compatibility with 19-inch server cabinets
- AC power supply with 1+1 hot-swappable backup, plus dual server power supply in Load Share mode for high reliability
DCI3100 8x100GE Specifications
Technical Specifications
| Function | Description |
|---|---|
| Size of equipment | 1RU: 44 (H) × 442 (W) × 600 (D) mm |
| Maximum transmission capacity of a single machine | 1RU 1.6Tbps (16 × 100G) |
| Maximum transmission capacity of a single fibre | Two 1RU units stacked to 3.2Tbps |
| Maximum transfer rate of a single port | 100Gbit/s |
| Service port type | 100G QSFP28 optical port, customised according to customer needs |
| Maximum number of ports on a single machine | 16 QSFP28 optical ports |
| Types of services supported | 100GE, determined by the service port type |
| Network level protection | Support line side 1+1 protection |
| Device-level protection | Power supply 1+1 hot backup 4 sets of fan hot backup |
| Installation method | 19-inch server cabinet |
| Power supply mode | AC: 90 to 260V, 2 hot-swappable server power modules |
| Management mode | Visual Web interface DCI3100 Network Management System |
| Heat dissipation | Forward air, rear air outlet, 4 hot-swappable fan units |
| Power consumption | < 600W (fully equipped) |
| Operating temperature range | −10 ℃ to 60 ℃ (typical) |
| Operating humidity range | 5 to 95% non-condensing |
| Storage temperature range | −40 ℃ to 85 ℃ |
| MTBF | > 100,000 hours |
Deployment Scenarios
- Data centre interconnect between sites that need high-capacity transmission from a single 1U unit
- Metropolitan or inter-building links where two stacked units are used to reach 3.2T per fibre
- Sites that mix 100GE and other services on one box without changing the existing network topology
- Deployments that require line side 1+1 protection with automatic route selection and in-band SNMP monitoring
- One-box site delivery where plug-and-play installation in a 19-inch server cabinet is needed
Packing & Shipping
Clients often worry about transit damage?
Our sturdy packaging puts those fears to rest. For different products we use waterproof film, foam protection, palletizing, wooden frame securing and cable reels. This ensures safe and reliable transport.
Packaging
Shipping
Payment
We support various payment methods, including Alibaba, Bank Transfer, Credit Card, PayPal, Alipay, and WeChat.
We accept currencies like USD, RMB, EUR, RUB, and more.
