SG5001 GPON/EPON ONU with CATV RF – 1×GE, SC/APC

SG5001 GPON/EPON ONU with a CATV RF port, one 1×GE auto-negotiation LAN port and an SC/APC PON uplink. GPON Class B+, 20 km reach, 47–1000 MHz RF output.

SKU: SG5001 分类:
Worry-Free After-Sales14-month warranty & responsive support
Efficient ProcurementOne-stop sourcing, fast turnaround
Fast Response Times24/7 expert technical support
Get wholesale pricing >>>

Description

Overview

The SG5001 single-port GPON/EPON ONU with CATV is a desktop optical network unit that delivers broadband data and a cable TV signal from one device. Alongside the network access function it provides a CATV interface, which makes it the natural choice for areas that already have CATV line coverage — and because the CATV and network services are handled separately, TV viewing does not affect broadband and the two services do not interfere with each other.

On the data side it terminates a single SC/APC single-mode PON uplink and presents one gigabit Ethernet port, and it accesses mainstream GPON and EPON OLTs. It is tested for interworking with Fiberhome AN5516, ZTE C220 / C300 / C320 / C600 and Huawei MA5600 / MA5680 / MA5800 platforms, and management runs over WEB / TELNET / CLI, ITU-T G.984.x OMCI and CTC 3.0 (backward compatible with 2.1 / 2.0).

The CATV branch is a full RF output stage: RF and optical power range +2 to −18 dBm, RF frequency range 47 to 1000 MHz, 75 Ω output impedance, optical receiving wavelength 1550 ± 10 nm, optical reflection loss ≥ 45 dB and MER ≥ 32 dB at −14 dBm optical input, with CATV remote management. The unit measures 114 × 85 × 23 mm, weighs under 250 g without its adapter, runs on 12 V 0.5 A and draws less than 6 W, with CATV / GE / LOS / PON / PWR indicators. It is rated for −5 °C to +45 °C and 10 % to 90 % non-condensing humidity.

SG5001 Key Features

  • Broadband data plus a CATV RF output in one ONU — 1 × GE and 1 × CATV interfaces
  • CATV and network services kept separate, so TV viewing does not affect broadband
  • GPON/EPON uplink on SC single mode, SC/APC, with up to 20 km transmission distance
  • GPON Class B+ with TX power 0 to +4 dBm and RX sensitivity −27 dBm
  • RF / optical power range +2 to −18 dBm and RF frequency range 47 to 1000 MHz
  • 75 Ω RF output impedance, optical receiving wavelength 1550 ± 10 nm and optical reflection loss ≥ 45 dB
  • MER ≥ 32 dB at −14 dBm optical input and > 35 dB at −10 dBm
  • RF output level and AGC range from 83 dbuv @ 0 to −10 dBm down to 73 dbuv @ −5 to −15 dBm
  • CATV remote management supported from the network side
  • SN / Password / LOID (GPON) authentication, DBA and two-way FEC with SR/NSR DBA and GEM/TCONT mapping
  • 1 × GE auto-negotiation RJ45 port with auto polarity detection (AUTO MDIX)
  • 4K VLAN ID, 2K MAC address table and integrated IEEE 802.1p QoS with four level priority queues
  • QinQ VLAN, 1:1 VLAN, VLAN reusing and VLAN trunk; VLAN 1:1 translation mode (≤ 8 VLANs)
  • IGMP v1/v2/v3 snooping — max multicast VLAN 8 and max multicast group 64 with fast leave
  • Management via WEB / TELNET / CLI, ITU-T G.984.x OMCI and CTC 3.0, backward compatible with 2.1 / 2.0
  • Auto-detecting, auto-configuration and auto firmware upgrade, with software dual backup and rollback
  • Rogue ONU detection, hardware dying gasp, Dying Gasp and EthPort LOS alarms, and Web Push
  • Under 6 W power consumption in a 114 × 85 × 23 mm enclosure

SG5001 Specifications

Device Parameters

Parameter Value Parameter Value
Dimension 114 mm × 85 mm × 23 mm Temperature −5 °C to +45 °C
Weight < 250 g (without power adapter) Humidity 10 % to 90 % (no condensing)
Power Supply 12 V 0.5 A Interface 1GE + 1CATV
Power Consumption < 6 W Indicators CATV / GE / LOS / PON / PWR

PON Interface

Item Specification
OLT compatibility Accesses mainstream GPON/EPON OLTs
Standards GPON Class B+
Optical connector SC single mode, SC/APC
Wavelength TX 1310 nm, RX 1490 nm
Transmission distance Up to 20 km
TX power 0 to +4 dBm
RX sensitivity −27 dBm
Overload power −8 dBm (GPON)
Authentication SN / Password / LOID (GPON)
PON features Two-way FEC, SR/NSR DBA, GEM/TCONT mapping

CATV Interface

Item Specification
Management Supports CATV remote management
RF / optical power range +2 to −18 dBm
RF frequency range 47 to 1000 MHz
RF output impedance 75 Ω
Optical receiving wavelength 1550 ± 10 nm
Optical reflection loss ≥ 45 dB
MER ≥ 32 dB (−14 dBm optical input), > 35 (−10 dBm)
RF output level and AGC range 83 dbuv @ 0 to −10 dBm / 81 dbuv @ −1 to −11 dBm / 79 dbuv @ −2 to −12 dBm / 77 dbuv @ −3 to −13 dBm / 75 dbuv @ −4 to −14 dBm / 73 dbuv @ −5 to −15 dBm

LAN Interface

Item Specification
Ethernet port 1 × GE, auto-negotiation RJ45 connectors
MAC address Restriction and learning capabilities
VLAN Ethernet port-based VLAN tag / tag stripping; Ethernet port local switching / isolation
Layer 2 Pass-through support

Function

Category Specification
Basic compatibility SN / Psw / LOID / LOID+Psw authentication (GPON); DBA; auto-detecting, auto-configuration and auto firmware upgrade; interworking with Fiberhome AN5516, ZTE C220 / C300 / C320 / C600 and Huawei MA5600 / MA5680 / MA5800
Data service functions Full-speed non-blocking switching; IGMP v1/v2/v3 snooping; QinQ VLAN, 1:1 VLAN, VLAN reusing and VLAN trunk; auto polarity detection of Ethernet ports (AUTO MDIX); integrated IEEE 802.1p QoS with four level priority queues; 4K VLAN ID; 2K MAC address table
Multicast IGMP v1/v2/v3 snooping; max multicast VLAN 8; max multicast group 64; fast leave; downlink multicast VLAN switching / transmission / stripping
VLAN 4K VLAN; auto VLAN detection; VLAN tag / untag / transparent / trunk mode; VLAN 1:1 translation mode (≤ 8 VLANs)
QoS Four queues including SP, WRR and 802.1P; SP / WRR / 802.1P / DSCP; flow mapping based on VLAN, 802.1p, Ethernet port or any combination; broadcast message rate limiting; Ethernet port speed limiting
O&M Software dual backup and rollback; WEB / TELNET / OAM / OMCI; optical link measurement and diagnosis
Alarm Dying Gasp and EthPort LOS
Management WEB / TELNET / CLI; ITU-T G.984.x OMCI; CTC 3.0, backward compatible with 2.1 / 2.0
Other Detecting rogue ONU and hardware dying gasp; Web Push

Deployment Scenarios

  • FTTH access where subscribers need broadband and cable TV service from a single ONU
  • Areas that already have CATV line coverage, where TV and data must stay independent of each other
  • Home users who want simultaneous internet and TV service without one affecting the other
  • FTTB and MDU deployments that run mainstream GPON/EPON OLTs from Fiberhome, ZTE or Huawei
  • Operator rollouts that provision subscribers remotely over OMCI and CTC 3.0

Packing & Shipping

Clients often worry about transit damage?

Our sturdy packaging puts those fears to rest. For different products we use waterproof film, foam protection, palletizing, wooden frame securing and cable reels. This ensures safe and reliable transport.

Packaging

ANKVI export packaging, photo 1 of 5 ANKVI export packaging, photo 2 of 5 ANKVI export packaging, photo 3 of 5 ANKVI export packaging, photo 4 of 5 ANKVI export packaging, photo 5 of 5

Shipping

ANKVI shipment and loading, photo 1 of 5 ANKVI shipment and loading, photo 2 of 5 ANKVI shipment and loading, photo 3 of 5 ANKVI shipment and loading, photo 4 of 5 ANKVI shipment and loading, photo 5 of 5

Payment

We support various payment methods, including Alibaba, Bank Transfer, Credit Card, PayPal, Alipay, and WeChat.

We accept currencies like USD, RMB, EUR, RUB, and more.

Payment methods accepted by ANKVI: bank transfer, credit card, Alibaba, PayPal, Alipay and WeChat