OCM Card – DWDM Channel Monitor, 50/100 GHz
The OCM Card measures discrete DWDM wavelengths at any point in an optical node, reports channel power data and supports 8-core fibre power monitoring.
显示 33-48 个结果(共 61 个结果)

The OCM Card measures discrete DWDM wavelengths at any point in an optical node, reports channel power data and supports 8-core fibre power monitoring.

The OLA Card is an optical line amplifier module for DWDM spans, running AGC and APC with 1528 to 1565 nm coverage and 1/4 slot occupancy.

The OMD08 Card is a passive 8-channel DWDM MUX/DEMUX with 100 GHz channel spacing, combining or splitting C-band odd and even wavelengths.

The OMD48 Equipment is a passive 48-channel DWDM MUX/DEMUX for standard 19-inch cabinets, 1U high and independent of the sub-frame chassis.

The OMD96 Equipment is a passive 96-channel DWDM MUX/DEMUX for standard 19-inch cabinets, 1U high and independent of the sub-frame chassis.

The OP1 Card is a 1+1 optical line protection card that switches to a backup line within seconds using dynamic synchronous switching, in 1/4 of a slot.

The OP2 Card is a 1+1 optical line protection card that switches to a backup line within seconds using dynamic synchronous switching, in 1/4 of a slot.

The OPA Card is a low-noise optical pre-amplifier module running AGC and APC over 1528 to 1565 nm and using only 1/4 of a standard slot.

The OTDR Card integrates cable monitoring, fault analysis and automatic fibre switching protection, running 24/7 automated monitoring from 1/4 of a slot.

The PTM Card family covers the PTM-W and PTM-E time synchronisation cards, each using only 1/4 standard slot capacity with ≤1.3 dB path loss.

The ROADM Card is a C-band distributed RAMAN amplifier that runs at constant pump power (AWC) with adjustable pump wavelengths and a narrow band filter.

The TFF Card is an optical splitter multiplexer for DWDM fixed wavelength add and drop services, covering four 100 GHz interval channels from a single slot.

The WSS09 1×9 ROADM Card is a nine-port wavelength selective switch that dynamically selects from 96 DWDM channels on the ITU-T 50 GHz C-band grid.

M20D1 is a 200G coherent service card with twenty 10GE access ports, 16QAM/QPSK modulation and 200GE transmission over 1200 km of non-relay fibre.

M2H10D1 200G coherent service card taking two 100GE ports or one 100GE plus ten 10GE links, with a 200G CFP2 DCO line side and 1200 km non-relay reach.

M8X2 400G coherent TMUX card muxing four 100GE or dual 400GE services onto two 400G CFP2 DCO lines with C-band 96-wave 50GHz tunable DWDM over 2000 km.